Blog

Remediation & Environmental Management Workshops

By Eagle Synergistic | October 10, 2019 | 0 Comments

This month we’re proud to be participating in two important conferences in the environmental consulting industry. October 15, 2019, we will see you at our booth at the CEMS Fall Conference, located at Mile High Stadium in Denver, Colorado. The focus is on “Economic Growth and Sustainability: Finding the Balance Between Population Growth and Environmental…

Understanding the Groundwater Sampler (GWS)

By Eagle Synergistic | August 9, 2019 | Comments Off on Understanding the Groundwater Sampler (GWS)

One of the newest HRSC tools, the Groundwater Sampler (GWS), allows operators to create an injection pressure log, while also being able to stop and take multiple discrete groundwater samples at various depths. The probe body houses 20 injection/collection screens and the operator uses two 1/4-inch water lines, one is designated for injecting, and the…

Understanding Low Level Membrane Interface Probe (LL-MIP) – ppb levels

By Eagle Synergistic | April 18, 2019 | Comments Off on Understanding Low Level Membrane Interface Probe (LL-MIP) – ppb levels

The Low-Level Membrane Interface Probe (LL-MIP) is a powerful tool from GeoProbe’s Direct Imaging toolkit. The LL-MIP system uses the same probe as standard MIP mode. However, unlike the standard Membrane Interface Probe operation, which uses continual carrier gas flows to carry VOCs from a membrane on the probe up a gas line and into…

Understanding a Membrane Interface Probe (MIP)

By Eagle Synergistic | January 3, 2019 | Comments Off on Understanding a Membrane Interface Probe (MIP)

The Membrane Interface Probe (MIP) is another powerful tool from GeoProbe’s Direct Imaging toolkit. The MIP allows operators to detect volatile organic compounds (VOCs) within the soil. As the MIP tool is advanced by direct push drilling, a heater block that houses a semipermeable membrane is heated to a set point, typically around 120 degrees…

Understanding an Optical Image Profiler (OIP)

By Eagle Synergistic | December 10, 2018 | Comments Off on Understanding an Optical Image Profiler (OIP)

The Optical Image Profiler is a powerful tool from GeoProbe’s Direct Imaging toolkit. The OIP probe contains a UV-light emitting semiconductor. As the OIP probe is advanced by direct push drilling operations, free phase petroleum (LNAPL) is induced to fluoresce by the UV-light. A small camera within the probe (beneath a sapphire window) is able…